Material of construction: 1. Bottom frame should be fabricated with 50 x 25 x 1.6 mm Thick GI Tube. 2. Vertical and Top frame should be fabricated with 25 x 25 x 1.6 mm Thick GI Tube. 3. Side cover and Rear cover should be fabricated with 1mm Thick GP Sheet. 4. Table top: 25 mm Thick compressed wood with both side lamination. Top surface should be laminated with 0.8mm thick pearl black 22109 (High glossive) lamination sheet. Front edge should be curve radius as specified in drawing. Edge binding tap should be provided all three sides. (Rear side, Right and Left sides) 5. Frame assembly should be finished with epoxy polyester powder coating colour DA Grey (structure finish) 6. Side cover and rear cover should be finished with epoxy polyester powder coating colour 7035 Light Grey (Structure finish). 7.Bottom M10 level mounting should be provided
